Call Us / Hablamos Español

(954) 4064344

Clic for Text Us

Essential Tips When Remodeling Your Pool

A swimming pool in the backyard it definitively set the scene for hours of quality family time, as well as playtime with friends. However, when pools look and feel a bit rough, it’s perhaps time to pool remodeling.

A pool remodeling project involves a huge responsibility, lot of budgeting and decisions. It also includes the use of a number of tools we’re likely not very familiar with.

Leaving the pool remodeling tasks in the expert hands of a pool construction company that provides a pool remodeling service you can trust, ensure a job well done. However it’s important for pool owners to know what to expect when hiring a pool remodeling service.

A regular day in the pool remodeling process began with the drainage of the pool.

The first step of any pool remodeling proyect is turning off any pool equipment, immediately following drain the pool. After that use the sump pump to get out any remaining water.

Chipping Out

If the owners have requested a ting, then this is the next step. Chipping out is possibly the noisiest of all pool remodeling steps, and this process takes about half a day. Contractors clean up the gunite shell and then clean it.

Tile and Coping Renovation

Over time, pool tiles and coping will wear away, splinter or discolor. If that’s not your case, maybe you just want to transform your pool into the atmosphere you’ve always dreamed of, and well, this is a great start.

Pool coping is the material above the tile line that generally covers the top of the pool structure. The pool coping is used to separate the pool structure from the pool decking.

If you want to renovate or replace your pool’s coping it is best to do it at the same time as the tile since the removal of the coping stones could cause the file to fall off.

If coping is installed correctly, any water that is splashed out of the pool should flow away from the pool and down into deck drains. Coping should be tilted slightly away from the pool.

Pool Decks

The covers around the pools can be made of various materials such as Stamped Concrete, Decorative or Paver Pool Decks, and have added aesthetic elements that will add great decor to your backyard space.

1

The pool deck pavers are basically rectangular pavers that are used especially for an outdoor swimming pool area’s construction.

Currently there is a variety of natural and manmade materials that are used for decks finishes, textures well adapted to their particular environment so during the pool remodeling, it is important to choose a deck with non-slip surface features, safe to sunbathe, play and hang out.

In Miami the most used pool deck finishes when pool remodeling are Travertine and pavers.  

Pool Deck Pavers used in the landscaping of outdoor swimming pool areas can be beneficial to homeowners and users of the pool area. Stone, brick, and concrete are the three main materials used to make these pool pavers.

These materials are best for pool paving purposes as they can weather the rigid effects of chlorinated or salt water pools.

On the other hand, Travertine is a natural material which comes from the family of limestones. Travertine pavers are environment-friendly, thick pieces of travertine which are mostly used for beautifying the pool decks, patios, driveways, walkways and outside stairs.

Pool Resurfacing 

worker pouring concrete into a swimming pool

If you see hollow spots, chipping or cracking on the surface of your pool, it is time to resurface your swimming pool.

Resurfacing basically involves chipping out the damaged material, applying a new finish and acid washing the pool’s surface.

Before resurfacing the first step is to get the pool prepped. After drain the pool use the sump pump to get out any remaining water, following this, remove any loose debris like leaves, chisel away any plaster that has gotten loose, and then sand down any edges that are sharp or rough. Finally use the cleaning solution and a sponge to clear away any dirt that remains.

The best Resurfacing Material use in South Florida are:

 Pool Plaster

Generally, new gunite pools are coated with pool plaster, which is cement mixed with marble sand or limestone. It is the least-expensive option for pool surfacing and typically lasts around 7 years.

Pebble Finishes

Pools Pebble finishes is actually a mix of plaster with cement blended . The addition of aggregate makes these more durable and stain-resistant than plaster alone. Pebble finishes can be somewhat rough and costs twice as much as plaster, but the upside is that they often last over 12 years.

Fiberglass

The prefabricated swimming pools made with fiberglass should be resurfaced with fiberglass, which is a polymer that is complemented by a polyester resinwish. If you have a fiberglass pool at home, this is the best alternative to resurfacing it.

Diamond Brite

Diamond Brite is made with a combination of natural quartz aggregate, polymer modified cement and non-fading Diamond Quartz in a stunning variety of colors.

diamond brite colors for a pool remodeling

Is unaffected by the harshest pool chemicals and resists permanent staining, Besides, the colorquartz accent colors won’t rust, rub off or fade like other colored aggregate because the pigment is ceramically bonded to the quartz aggregate.

When resurfacing your swimming pool with Diamond Brite you get a beautiful yet durable pool finish and a slip-resistant surface.

Pool Waterfall

Custom Pool waterfalls are a reality at Urban Pool Services, with our South Florida Pool Remodeling Service. Our team of Architects, Builders, and Pool Designers will be recreated your ideas to visualize the oasis you’ve always dreamed of long before it is built

At Urban Pool Service with our South Florida Pool remodeling Service we are committed to making your dreams of a shiny, luxurious new pool in your backyard a reality

There are many ways we can build a pool waterfall, with no limitations, because we have a variety of designs and layouts to meet any idea you have in mind. 

Infinity Waterfall

An infinite waterfall connects two levels of pool into one. This is an excellent way to divide the pool areas in half, separating the two and keeping them together with the waterfall. It will look as if the top layer of the pool is overflowing into the bottom layer, which is a lot of fun for children and adults. Moreover, building up instead of out is a great way to make the most of a smaller space, giving your backyard an exuberant and complete look.

Natural Rocky Waterfall

Many South Florida homeowners love to build rock structures around the sides of the pool, with water dripping over the spaces and furrows in the rocks to finally join in a waterfall that ends in the pool. Rocks can be designed in different ways, from natural to geometric.

 People love the way the water mimics natural rivers and waterfalls, and you can decorate the rock formations to give your pool the appearance of a tropical refuge

In addition, you can use this as a chance to improve your landscape skills. Planting tropical trees and shrubs around the rocks will make it look like a real island bay, and with a few comfortable chairs around it, you can make it a great place to relax all day and all night.

Whether you consider your pool remodeling a DYS project or the other way around, want to renew your pool today with our Luxury Pool Construction Service, keep in mind that any pool job, no matter how simple it may seem, requires the use of a number of tools you’re likely not very familiar with.

So leaving pool remodeling tasks in the hands of our expert, certified pool builders ensures the complete transformation of boring pools and backyards into outdoor paradises with luxurious details and style.

kendall

Call us and we will help you bring your pool to life.

  • Get your pool back.
  • Remodel your pool or patio.
  • Receive advice for the construction of your new pool.

(954) 406-4344

Call Us | Llámanos, Hablamos Español.